Are You Ready To Party??

Step 1:  Roll out the Bounce House so that it is spread out on the ground. Connect one arm to the blower

Step2: Cinch the strap to the neck of the blower tightly to make sure the tube does not fall off. Make sure the tube is not twisted when you inflate it.

Step 3: Inflate the Bounce House by turning on the blower. The blower must stay running in order to keep it inflated. A 20 amp breaker is needed for the blower with a maximum of 50 ft. of 12 gage extension cord.

*Your Bounce House may also look like this!