Are You Ready To Party??

1. Begin by making sure everything is attached. Push the canisters back into place.

2. Attach the top cord to the base.

3. Attach the drip dish

4. Connect the drip dish cover to the bottom piece.

5. Once the whole machine is assembled it should look similar to this image.

6. Pull open drawer where the buttons are located. Turn the power on.

7. Add amount of water desired (follow directions on flavoring jug). Be sure to fill at least to the minimum line on the side of the machine, not exceeding the maximum line.

8. Add amount of flavoring desired (following the directions on jug or to taste).

9. Turn on the “ICE” button for the sides of the machine that you are using. As well as the auger to begin mixing the frozen drink.

10. Let the machine mix the Frozen Drink until it becomes a slush mixture. This may take over a half hour depending on the amount of slush mix.

11. Once your slush is mixed, pull down EASILY on the knobs to dispense the Frozen Drink.

12. Enjoy your Frozen Drink! CHEERS!